Libra Harvest: Device Installation / Mounting

From the Agrimatics support center · Libra Harvest · Getting Started · Original article

To mount the Libra Cart device, it is recommended that it be installed on the front of the grain cart, with a clear line of sight to the Primary Display, and its connectors pointing downward, preferably protected from direct exposure to the elements. Optionally, you can leave the Libra Cart device in the grain cart tractor. Connect the cart’s load cell junction box cable to the device. Secure any excess cable.

12 - Volt Powering Options (available on models M0014,M0016, M0018)

If you have a 12-volt vehicle power cable, you can connect it to the device’s power connector. Secure any excess cable. If not, cover the unused power connector with the supplied cap. WARNING: Vehicle battery connection shall be in accordance with all vehicle safety instructions including 4A SLOW ACTING protective fusing with minimum 20 AWG wiring.

Need a hand? Central City Scale is an authorized Agrimatics distributor. Call 800-582-3175, Monday to Friday 8:00 to 5:00 Central, or go back to Libra Harvest help.